Plastic Fiber Polishing Solution ⅠProgram Description： HFBR plastic fiber optic connectors are often used in high-voltage electrical control equipment and data communication control links that require high immunity to electromagnetic interference, so the requirements for the lapping of connector end faces are quite stringent. After numerous grinding and polishing processes, NEOFIBO has finally proven a […]
Plastic Fiber Polishing Solution Read More »
Neofibo’s extinction ratio tester, available in a variety of types, high precision, wide dynamic range of testing, stable equipment , accurate and reliable test results, fast response time, accurate testing, welcome to call for more information! 1、Single Channel Polarization Extinction Ratio Mater，PER-8605 PERM-8605 Polarization extinction ratio meter is a professional equipment for polarization extinction ratio (PER) testing
New Arrivals！！Polarization Extinction Ratio Mater Read More »
What about Single Model and Multi Model Cable? Single Model Features: 1> Single mode cable is a single stand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. 2> Single Mode Fiber with a relatively narrow diameter, through which only one mode will propagate typically 1310nm or
What about Single Model and Multi Model Cable? Read More »
Differences in Polishing Processes for Different Ferrule Diameters Large Diameter Ferrule Face Grinding Process（FC/SC/ST-PC） Process Rubber Pad Polishing Film Auxiliary Liquids Time Pressure Degumming PR5X-500-80 GA5D 30um Distilled water 30s Pressurization after 10 rpm Rough grinding PR5X-500-80 DR5D 5um Distilled water 30s Pressurization at start Medium Grinding PR5X-500-80 DJ5D 1.5um Distilled water 30s Pressurization at
Differences in Polishing Processes for Different Ferrule Diameters Read More »
1、How to remove scratches? Why the scratches are produced： (1) The time of medium polishing is too short：every process is to reduce the roughness of the end-face. If the polishing time is not enough, some big scratches will remain on the end-face, and HF5D has no way to remove these big scratches. Performance: Deep and
How to Solve the Problem of End-face Polishing？ Read More »
Differences between the 3 Common End-face Types 1、Why should fiber optic end–faces be polished? With connectors mounted on one fiber end-face, return loss is unavoidable, which occurs due to reflections from the light source. Severe light loss can damage the laser light source and interrupt the transmitted signal. In order to allow better contact between
Differences between the 3 Common End-face Types Read More »
Application of PM Fiber Because of the function of maintaining the polarization state of light (e.g.,【Picture 1】), the applications of PM fibers cover a variety of fields such as communications, medicine, sensing, and military, etc. In addition to typical deflectors, coherent communications, and hydrophones, some other applications of PM fibers will be introduced here. 【Picture 1】Structure of a
Polarization Maintaining Fibers for Different Applications Read More »
What’s the Fast and Slow Axis？ Polarization Maintaining fibers work by inducing a difference in the speed of light in the two perpendicular polarizations passing through the fiber. This birefringence creates two major transmission axes within the fiber, called the fast and slow axes of the fiber. The fast axis is the direction of the small
What’s the Fast and Slow Axis？How to Align the PM Fiber？ Read More »
What’s Polarization Maintaining Fiber？ Before understanding what a PM fiber is, let’s look at what polarization properties are first. Polarization is a property of transverse waves, which refers to the nature of transverse waves oscillating in a particular direction in a plane perpendicular to their direction of propagation. Light is an electromagnetic wave that propagates as
What is PM Fiber? How to manufacture PM fiber? Read More »
Categories of Polarization Maintaining Fibers There are many types of polarization maintaining fibers, which can be divided into high birefringence optical fibers (birefringence coefficient B~10-4) and low birefringence optical fibers (B~10-7; B~10-9) according to the size of birefringence. According to the generation mechanism of the birefringence phenomenon, it can be divided into structural birefringence and stress
Categories of Polarization Maintaining Fibers Read More »
