Shenzhen Neofibo Fiber Optic Curing Oven

Neofibo Fiber Optic Curing Ovens are available in vertical and horizontal, their models are OFO-5200, OFO-3000, OFO-2001, OFO-2000, OFO-24D, OFO-24.  OFO-24D and OFO-24 are small curing oven.

Fiber optic curing oven is a special equipment to heat and solidify optical fiber, which is widely used for production of optical fiber pigtail , patchcord and bonding for optical fiber. With good performance, it is used for heating and solidifying all types of fiber connectors, such as SC , LC , FC , ST, etc.

OFO-5200:

Neofibo Fiber Optic Curing Oven is a type of universal curing oven for fiber optic connectors, it is available for general connectors (such as FC/SC/ST, MU/LC) after glue injecting. The heating board could contain 52 connector ferrules at most. There is indicator light, timer and temperature indicator. Simply operation and perfect solidified effect.

Key Features:

  1. Applied to heat curing Epoxy glue for fiber optic connectors and patch cord;
  2. Epoxy curing for FC,SC,LC,MU,ST, MT,MPO connectors
  3. vertical heating Board, convenient for putting ferrules and connectors;
  4. High efficiency, 52 ferrules heating synchronously;
  5. Two independence control system providing constant and stable temperature;
  6. Uniform heating, heat even to exhaust the least;
  7. Easy to operation and dependable.

Technical Parameters:

Dimension (mm)  550 x 320 x 190
Weight (kg) 10.5 kg
Heating Temperature  50~ 200 Celsius degree
Accuracy +/- 1 Celsius degree
Input Voltage  100~120VAC, 50Hz  /  200-240VAC, 50Hz
Power Consumption  800 W
Warm-up Time (approx.)  15 min
Connector Type  1.25 mm / 2.50 mm ferrule, FC/ST/SC/MU/LC
Capacity 52 heads for 1.25mm, 48heads for 2.5mm

OFO-2001:

Neofibo Fiber Optic Curing Oven is a type of universal curing oven for fiber optic connectors, it is available for general connectors(such as FC/SC/ST, MU/LC) after glue injecting. The heating board could contain 100 connector ferrules at most. There is indicator light, timer and temperature indicator. Simply operation and perfect solidified effect.

Key Features:

  1. Input voltage: 220 VAC 50 Hz, or 110 VAC 50 Hz;
  2. Horizontal Heating Board, convenient for putting ferrules and connectors;
  3. High efficiency, 100 ferrules heating synchronously;
  4. Indicator shows temperature and time, high precision for temperature control;
  5. Automatically timing, and buzzer alarm reminding after time is up;
  6. Without additional heating board, economic benefits.

Technical Parameters:

 Dimension (mm)  420 x 320 x 140
Weight (kg)  8.5 kg
Heating Temperature  40 ~ 200 Celsius degree
Accuracy +/- 1 Celsius degree
Input Voltage  100~120VAC, 50Hz  /  200-240VAC, 50Hz
Power Consumption  800 W
Warm-up Time (approx.)  15 min
Connector Type  1.25 mm / 2.50 mm ferrule, FC/ST/SC/MU/LC
 Capacity  100, 80

OFO-2000:

Neofibo Fiber Optic Curing Oven is a type of universal curing oven for fiber optic connectors, it is available for general connectors (such as FC/SC/ST, MU/LC) after glue injecting. The heating board could contain 100 connector ferrules at most. There is indicator light, timer and temperature indicator. Simply operation and perfect solidified effect.

Features
  • Input voltage: 220 VAC 50 Hz, or 110 VAC 50 Hz;
  • Horizontal Heating Board, convenient for putting ferrules and connectors;
  • High efficiency, 100 ferrules heating synchronously;
  • Indicator shows temperature and time, high precision for temperature control;
  • Automatically timing, and buzzer alarm reminding after time is up.

Technical Parameters:

Dimension (mm)
420 x 320 x 140
Weight (kg)
8.5 kg
Heating Temperature
40 ~ 300 ℃
Accuracy
+/- 1 ℃
Input Voltage
100~120VAC, 50Hz / 200-240VAC, 50Hz
Power Consumption
800 W
Warm-up Time (approx.)
15 min
Connector Type
1.25 mm / 2.50 mm ferrule, FC/ST/SC/MU/LC
Capacity
100, 80