EIM-2000 Neofibo MT Automatic Control Glue Suction Machine

EIM-2000 Neofibo MT Automatic Control Glue Suction Machine

MT Glue suction

Description：

Through EIM-2000, the glue is sucked out of the end face of the ferrule, while ensuring that the glue is sufficient and evenly distributed in the MT ferrule hole, so as to better ensure that the glue is in full contact with the optical fiber, avoiding air bubbles and affecting the performance; Through EIM-2000, it can Better ensure that the glue is evenly distributed on the end face of the ferrule, which is convenient for grinding and removing glue and control of the production process.MT Glue suction

Features:

1. Digital display of air pressure gauge: more accurate control of air pressure, convenient adjustment, in order to control the amount of glue sucked out at the front end of the MT ferrule.
2. Clock digital display: The time can be set according to the viscosity of the glue to maintain the consistency of the amount of glue sucked out
3. Foot switch: convenient for employees to operate and improve production efficiency
4. Ferrule interface: The tube interface is easy to operate, it takes a long time, and there are many glue residues, only need to change the hose, simple, economical and convenient
5. Compared with manual operation: simple operation, convenient and practical, improved efficiency, and reduced cost

Precautions:

1. Air intake: ensure that the air intake is dry and free of moisture, so as not to affect the moisture and life of the internal electrical parts
2. Barometer adjustment: Pull up the black lever and turn it clockwise to adjust the atmospheric pressure, otherwise, it is to decrease. After adjustment, push down the black lever to lock it to prevent misadjustment.
3. When there is no operation, turn off the power
4. Use a dedicated power cord for the power plug, the shell is grounded, and a fuse is attached next to it