Description:
- Designed exclusively for axis alignment of polarization-maintaining optical fiber connectors;
- Heating and curing optical fiber ferrule and capillary;
- The system is composed of a monitor, a CCD camera focusing system, a connector heating fixing table, and a tight-packed fiber rotator.
Key features:
- Suitable for polarization-maintaining fiber alignment;
- High-definition CCD camera, optical zoom 100X~800X adjustable;
- After the shaft alignment is completed, the optical fiber can be directly heated and cured in the optical fiber ferrule or capillary;
- The adjustment angle of the shaft is 0~360 degrees;
- It can be used for APC polarization-maintaining ferrule and capillary, grinding and mounting plate for positioning;
- It is suitable for checking the end face of the optical fiber without disassembling the disk after the optical fiber is polished.
Technical Parameter：
| Model | PMF-425 |
| Brand | NeoScope |
| Function | Polarization-maintaining fiber alignment, heating and curing, end-face inspection |
| gain | 100~800X adjustable, default 400X |
| To shaft connector | Standard configuration: 2.50mm ferrule and connector positioning piece Optional: FC, SC connectors and capillary positioning parts |
| Preheating temperature | 85～150 degrees Celsius |
| Preheating time | 4～6 minutes |
| heating power | 80～100W; 200V; 50Hz |
| Adjustable angle on axis | 0～360 degrees |
Standard Configuration：
| Serial Number | Description | Quantity |
| 1 | CCD camera focusing system | 1 set |
| 2 | Heating timing curing system | 1 set |
| 3 | 250/900um fiber rotator | 1 set |
| 4 | LED external light source | 1 set |
| 5 | 24 inch Samsung LCD monitor | 1 set |
| 6 | 12V 5A power adapter | 1 piece |
| 7 | AC power cord | 1 piece |
Ordering Information:
| Serial Number | Description and model | Quantity | Illustrate |
| 1 | PMF-425P, Polarization maintaining fiber alignment system | 1 set | Standard configuration |
| 2 | PMF-LC-DWJ, LC connector to shaft positioning piece | 1 piece | Standard configuration |
| 3 | PMF-25-DWJ, 2.50mm ferrule to shaft positioning piece | 1 piece | Standard configuration |
| 4 | PMF-200PL, Align the shaft on the capillary grinding jig,
On-line inspection of the end face of the polarization-maintaining fiber |
1 set | Optional accessories |
| 5 | PMF-SC-DWJ, SC connector to shaft positioning piece | 1 piece | Optional accessories |
| 6 | PMF-FC-DWJ, FC connector to shaft positioning piece | 1 piece | Optional accessories |
| 7 | PMF-ST-DWJ, ST connector to shaft positioning piece | 1 piece | Optional accessories |
