The shinho x900 is a popular fiber fusion splicer used in the telecommunications industry. while it is an advanced piece of equipment, it is not immune to common issues that may arise during use. in this article, we will share tips for troubleshooting common issues with the shinho x900, helping you to get the most out of your machine.
Issue #1: arcs during splicing
One of the more common issues with the shinho x900 is the presence of arcs during the splicing process. this can cause poor splice quality and weaken the fiber. the most likely cause of this issue is dirty electrodes, which can be easily cleaned with alcohol and a cotton swab.
Issue #2: failure to splice
Another issue that can occur with the shinho x900 is a failure to splice. this can be caused by a number of factors, including improperly stripped fiber, fiber that is too long or too short, or dirty v-grooves. check each of these components and ensure that they are clean, properly prepared, and within the manufacturer’s specifications.
Issue #3: poor cleaving
A third issue that can arise with the shinho x900 is poor cleaving. this can be caused by a dull or damaged blade, improper cutting technique, or dirty fiber. to address this issue, replace the blade and ensure that the cutting technique is correct. if the fiber is dirty, clean it with alcohol and a cotton swab.
Issue #4: inconsistent arc time
Another issue that may arise with the shinho x900 is inconsistent arc time. this can result in poor splice quality and can be caused by a damaged electrode or a malfunctioning machine. check the electrode for any damage, and if there is none, contact the manufacturer for assistance.
By using these tips for troubleshooting common issues with the shinho x900, you can keep your machine running smoothly and avoid costly downtime. remember to always follow the manufacturer’s instructions and specifications for care and maintenance, and seek professional assistance if you are unsure about any aspect of your machine’s operation.