MS-3T-06-G3/G4 Soft-Strip Ribbon fiber jacket stripper

Main features:
MS3: Multi-core strip hot stripping pliers
MS4: Single core hot stripping pliers
1, longitudinal peeling, small peeling force (multi-core tape-the maximum peeling force is less than 3 pounds; single core-the maximum peeling force is less than 1 pound). The stripping quality is high, no damage to the optical fiber, no damage.
2, Wide application range, can strip all standard multi-core optical fiber ribbons (Encapsulated, Bonded, Ribbonized, Flat).
3, Optional multiple power supply methods, such as battery power supply, AC adapter power supply.
4，Various uses, can be combined flexibly and quickly. For different sizes and types of optical fibers or cables, the optical fiber guide frame, optical fiber guide frame fixing parts, and blade kit blades can be replaced.
5. Handle assembly: battery or AC adapter power supply, 4 feet long power cable can be used to connect the No. 1 battery box, 6V battery or AC adapter. When the hand pressure is released, the handle opens automatically to cut off the power supply of the heating furnace.
6. Blade kit: Choose a suitable blade kit according to the coating or cladding diameter of each optical fiber. A pair of inverted blades are automatically aligned around the center of the fiber guide frame to ensure concentric scoring and precise peeling, and not Any nicks or damage on the fiber. The blade moves linearly to ensure correct positioning. The color code should be the same as that of the fixing part of the fiber guide frame.
7. Optical fiber guide frame fixing parts: to ensure that the fiber guide frame is in place, the color code should be consistent with the blade kit.
8. Fiber guide frame: According to the type of fiber to be stripped, fiber guide frames with different inner apertures can be selected to ensure accurate positioning of the fiber and proper stripping without nicks or damage.
9. Peeling force: The peeling force acts on the optical fiber longitudinally. It greatly avoids the chance of harmful drag of the optical fiber on the blade, even when the operator is negligent or fatigued.
10. Stripping length ruler: The stripping length ruler is used to refer to the stripped length, and the unit is calibrated in 1/16″.
11. Heating furnace: heat and soften the material to be stripped, close the handle and start to work, allowing 1″, 2″ or 3″ maximum stripping length
12. Elastic component: The elastic component ensures that the handle is separated and the residue is ejected.
13. Handle component: internal AA battery power supply
14. Assembly tool: Use the assembly tool to quickly and easily install and remove the blade kit and the optical fiber guide frame fixing parts.
15. Cleaning brush: The cleaning brush (supplied with the handle) efficiently cleans the tiny residue on the tool.
16. The 4-foot power cable can be used to connect the No. 1 battery box, 6V battery or AC adapter.

Single core hot stripping pliers specification list：

Single-core fiber tool and blade selection
Cladding exposed diameter（µ）m	Applicable blade diameter（in)	Applicable blade diameter(µm)	Tool part number	Replace the blade	Blade color
<80	0.0045	114.30	MS4-T-04S-FS	MS4-RB-04S	Transparent
80-120	0.0055	139.70	MS4-T-05S-FS	MS4-RB-05S	Lavender
125-135	0.0063*	160.02	MS4-T-06S-FS	MS4-RB-06S	purple
125-175	0.0080**	203.20	MS4-T-08S-FS	MS4-RB-08S	red
180-230	0.010	254.00	MS4-T-10S-FS	MS4-RB-10S	Light blue
235-280	0.012	304.80	MS4-T-12S-FS	MS4-RB-12S	White
285-330	0.014	355.60	MS4-T-14S-FS	MS4-RB-14S	Dark green
335-380	0.016	406.40	MS4-T-16S-FS	MS4-RB-16S	orange
385-430	0.018	457.20	MS4-T-18S-FS	MS4-RB-18S	yellow
435-500	0.021#	533.40	MS4-T-21S-FS	MS4-RB-21S	velvet
505-550	0.023	584.20	MS4-T-23S-FS	MS4-RB-23S	maroon
555-600	0.025	635.00	MS4-T-25S-FS	MS4-RB-25S	Light green
605-680	0.028##	711.20	MS4-T-28S-FS	MS4-RB-28S	black